The determination of velocity fluctuations in shear flows by means of PTV

The present study considers the effects of some parameters in image acquisition and analysis procedures in connection with the use of the Particle Tracking Velocimetry (PTV) technique. The interest is focused towards flow fields with large velocity gradients as shear flows; in the paper, velocity measurements by PTV are performed in a turbulent channel flow upstream and downstream of a backward facing step at low Reynolds numbers. This is a flow field largely investigated in the past with available numerical and experimental to make comparison with. Among the possible parameters to be chosen in particle image acquisition and analysis, the following are considered - the concentration of seeding particles in the imaged region; - the spatial resolution of the image acquisition system; - the parameters used in the image analysis algorithm

A Feature Tracking velocimetry technique applied to inclined negatively buoyant jets

We have applied a Feature Tracking Velocimetry (FTV) technique to measure displacements of particles on inclined negatively buoyant jets (INBJs), issuing from a circular sharp-edged orifice, in order to investigate, among the others, the symmetry properties of the velocity field on this phenomenon. Feature Tracking Velocimetry is less sensitive to the appearance and disappearance of particles and to high velocity gradients than classical Particle Image Velocimetry (PIV). The basic idea of Feature Tracking Velocimetry is to compare windows only where the motion detection may be successful, that is where there are high luminosity gradients. The Feature Tracking Velocimetry algorithm presented here is suitable in presence of different seeding densities, where other techniques produce significant errors, due to the non-homogeneous seeding at the boundary of a flow. The Feature Tracking Velocimetry algorithm has been tested on laboratory experiments regarding simple jets (SJs) and inclined negatively buoyant jets released from a sharp-edged orifice. We present here velocity statistics, from the first to the fourth order, to study, among the others, the differences between simple jets and inclined negatively buoyant jets, and to investigate how the increase in buoyancy affects the inclined negatively buoyant jet behavior. We remark that, to the best of authors’ knowledge, this is the first attempt to investigate velocity statistics of an order higher than the second on Inclined Negatively Buoyant Jets. Among the others quantities, the mean streamwise velocity decay and the integral Turbulent Kinetic Energy have been measured and analyzed, both along the jet axis and in the upper and lower region of the simple jets and inclined negatively buoyant jets, as well as the streamwise and spanwise velocity skewness and kurtosis evolution along the axis. Results show the role of buoyancy in modifying the inclined negatively buoyant jet features; moreover, it is highlighted that the asymmetry of inclined negatively buoyant jets cannot be considered only a far field feature of this phenomenon, as it arises very close to the release point

Three-dimensional structure of the flow inside the left ventricle of the human heart

The laboratory models of the human heart left ventricle developed in the last decades gave a valuable contribution to the comprehension of the role of the fluid dynamics in the cardiac function and to support the interpretation of the data obtained in vivo. Nevertheless, some questions are still open and new ones stem from the continuous improvements in the diagnostic imaging techniques. Many of these unresolved issues are related to the three-dimensional structure of the left-ventricular flow during the cardiac cycle. In this paper we investigated in detail this aspect using a laboratory model. The ventricle was simulated by a flexible sack varying its volume in time according to a physiologically shaped law. Velocities measured during several cycles on series of parallel planes, taken from two orthogonal points of view, were combined together in order to reconstruct the phase averaged, three-dimensional velocity field. During the diastole, three main steps are recognized in the evolution of the vortical structures: i) straight propagation in the direction of the long axis of a vortex-ring originated from the mitral orifice; ii) asymmetric development of the vortex-ring on an inclined plane; iii) single vortex formation. The analysis of three-dimensional data gives the experimental evidence of the reorganization of the flow in a single vortex persisting until the end of the diastole. This flow pattern seems to optimize the cardiac function since it directs velocity towards the aortic valve just before the systole and minimizes the fraction of blood residing within the ventricle for more cycles

Water waves overtopping over barriers

A numerical and experimental analysis of the wave overtopping over emerged and submerged structures, is presented. An original model is used in order to simulate three-dimensional free surface flows. The model is based on the numerical solution of the motion equations expressed in an integral form in time-dependent curvilinear coordinates. A non-intrusive and continuous-in-space image analysis technique, which is able to properly identify the free surface even in very shallow waters or breaking waves, is adopted for the experimental tests. Numerical and experimental results are compared, for several wave and water depth conditions

Flow dynamics in a model of a dilated thoracic aorta prior to and following prosthetic replacement

We numerically investigate the flow dynamics in a model of a dilated thoracic aorta, and compare the flow features with the case of a prosthetic replacement in its ascending part. The flow is characterized by an inlet jet which impacts the aortic walls and sweeps toward the aortic arch. Secondary flows generated by the transvalvular jet evolve downstream into a helical flow. The small curvature radius at the end of the aortic arch induces flow separation and vortex shedding in the initial part of the descending aorta, during the systole. The implantation of a prosthesis determines several modifications in the global and local flow patterns. An increase of the pulse wave velocity in the aorta leads to larger pressures inside the vessel, due to the geometrical and rigidity modifications. The sweeping jet is more aligned along the axial direction and propagates faster along the aortic arch. Consequently, a stronger separation of the flow downstream of the aortic arch is observed. By also exploiting manifold analysis, we identify regions characterized by near-wall disordered flows which may present intense accumulation and drop of concentration of biochemicals. These regions are localized downstream of the prosthetic replacement, in the aortic arch, and may be more prone to a new emergence of vessel dilation

Can wall shear-stress topology predict proliferative vitreoretinopathy localization following pars plana vitrectomy?

We numerically study the fluid dynamics of oil tamponade in models of vitrectomized eyes prompted by a subset of daily activities corresponding to movements on the horizontal plane with the patient in a standing position. Bulk flow features are related to near-wall flow topology and transport at the retinal surface through a wall shear-stress-based analysis. Proliferative VitreoRetinopathy (PVR) is the leading cause of retinal re-detachment occurring in about 20% of all cases due to the accumulation of inflammatory cells in discrete retinal regions. Signalling soluble mediators stimulate inflammatory cells’ chemotaxis and studying their distribution across the retinal surface may acquire clinical relevance. In all the investigated cases, persistent and elongated regions along the retina, potentially prone to accumulate chemo-attractants and cells are observed. Gradients of soluble inflammation mediators present in the aqueous are known responsible for the so-called epithelial-mesenchymal transition that initiates PVR and favours recurrent retinal detachment prompting the proliferation of inflammatory cells with collagen matrix deposition and its contraction. The surgical apposition of encircling scleral buckling elements, known for over a century to influence PVR formation and localization, modifies the attracting regions, possibly causing an accumulation of molecules and cells along approximately vertical lines that follow the rising menisci due to the cerclage indentation. The resulting spatial pattern is compatible with clinical observations. This study may open toward rational analyses of near-wall transport to predict PVR pathogenesis by relating biochemical accumulation in certain areas of the retina to clinical conditions

Eulerian and Lagrangian time scales of the turbulence above staggered arrays of cubical obstacles

We present results from water-channel experiments on neutrally-stable turbulent flows over staggered arrays of cubical obstacles modelling idealised urban canopies. Attention is concentrated on the vertical profiles of the Eulerian (TE) and Lagrangian (TL) time scales of the turbulence above three canopies with different plan area fractions (λP = 0.1, 0.25 and 0.4). The results show that both the streamwise and vertical components of TL increase approximately linearly with height above the obstacles, supporting Raupach’s linear law. The comparisons with the Lagrangian time scales over canyon-type canopies in the skimming flow and wake interference regimes show that the staggered configuration of cubical obstacles increases the streamwise TL, while decreasing its vertical counterpart. A good agreement has also been found between the eddy viscosities (KT) estimated by applying Taylor’s theory and the classical first order closure relating the momentum flux to the velocity gradient. The results show that KT obeys Prandtl’s theory, particularly for λP = 0.25 and 0.4

Do Daily Activities Impact Gas Tamponade - Retina Contact after Pars Plana Vitrectomy? A Computational Fluid Dynamics Study

Purpose:To calculate the retinal surface alternatively in contact with gas and aqueous because of fluid sloshing during daily activities such as ocular saccade, turning the head, standing up, and being a passenger of a braking car.Methods:Fluid dynamics of aqueous and gas tamponade was reproduced using computational methods using the OpenFOAM open-source library. The double-fluid dynamics was simulated by the volume of fluid method and setting the contact angle at the aqueous-gas-retina interface.Results:Sloshing increased the retinal surface in contact with aqueous by 13% to 16% regardless of fill rate and standing up determined the largest area of wet retina, followed by car braking, head rotation, and ocular saccade (P < 0.001). All activities except the ocular saccade determined a significant increase in the surface of retina in contact with the aqueous (P < 0.005). Car braking induced the highest shear stress (6.06 Pa); standing up determined the highest specific impulse and saccade the lowest.Conclusion:Daily activities instantaneously reduce the amount of retina consistently in contact with gas tamponade and increase shear stress giving aqueous a potential access to the subretinal space regardless of patients' compliance

Turbulence investigation in a laboratory model of the ascending aorta

This study aims to investigate turbulence inside a model of the human ascending aorta as a function of the main flow control parameters. For this purpose, we performed a two-dimensional in vitro investigation of the pulsatile flow inside a laboratory model of a healthy aorta by varying both the Reynolds and Womersley numbers. Our findings indicate that the velocity fluctuations become significant particularly during the deceleration phase of the flow, reach the maximum near the systolic peak and then decay during the rest of the diastole phase. Higher levels of turbulence were recovered for increasing Stroke Volumes, in particular maxima of Turbulent Kinetic Energy occurred in the bulk region while higher values of Reynolds shear stresses were found in correspondence of the sinus of Valsalva

A novel automatic method for the urban canyon parametrization needed by turbulence numerical simulations for wind energy potential assessment

The energy transition to more sustainable forms is currently ongoing worldwide, because of the environmental impacts produced by the non-renewable energy sources employed in the last decades. Among the main alternatives, wind plays a key role and, nowadays, innovative instruments, such as small-scale turbines allow for installation of wind turbines in urban areas. Their energy potential assessment requires high-accuracy simulations of the turbulent flows in the urban canopy layer, which, in turn, require detailed information about the geometrical properties of the basic element to classify urban surfaces, i.e., the urban canyon, often not available. In this work, we propose a novel automatic method, based on Voronoi graph, to univocally identify urban canyons and to extract their geometrical parameters from online available GIS (Geographic Information System) data, and test it on four European cities that differ in size, story and location. Results show the capability of the method to identify the single urban canyon and to properly extract its geometrical parameters, which tend to assume similar values for the largest cities. Moreover, we first attempt to propose and test some curves to generally describe the data probability distribution, which may be useful for turbulence simulations for urban wind energy assessment and planning. The best results are found for the canyon aspect ratio